The Philippine Renewable Energy 2021
Optimal, Inc. supported the virtual conference last November 18-19, 2021
SATEC JERUSALEM 2019
Yukon™ IED Manager Suite
Eaton’s Cooper Power™ series Yukon™ IED Manager Suite (IMS) provides power system operators with a complete suite of software applications to remotely manage all installed intelligent electronic devices (IEDs).
Utilities are increasingly turning to integration and automation to enhance power system performance and reliability. Intelligent Electronic Devices (IEDs) are the cornerstone of their efforts. Installed throughout the utility, they protect the network, monitor critical equipment, detect problems, and prevent outages.
However, IEDs are produced by a variety of manufacturers and feature proprietary technologies as well as multiple protocols and data formats. This can create a maintenance and compliance nightmare.
Yukon™ IED Manager Suite (IMS) helps solve these problems. Not only does it integrate all IEDs into a cohesive, manageable whole, it also provides complete, enterprise-wide access to operational and non-operational data in a highly secure environment.
With thousands of IEDs being deployed in substations and in the field utilities are now faced with a growing management and compliance challenge.
Yukon IED Manager Suite provides utilities with the tools necessary to manage their fleet of intelligent devices in a secure and automated manner:
• Keep track of IED inventory
• Provide compliance reports and auditable logs
• Provide secure remote access
• Retrieve fault records, SOE, and oscillography
• Manage device configuration settings
• Manage passwords
• Manage firmware and settings updates
Yukon IED Manager Suite is composed of the following software modules:
• Manages communications with field devices
• Provides authentication and authorization services, ties in to Microsoft® Active Directory®
• Provides secure remote maintenance access, auto-login, command filtering
• Retrieves device settings, monitors for changes
• Updates device passwords
• Updates device firmware
• Retrieves fault records, SOE, and oscillography
Want to inquire?
Yukon™ Visual T&D™ HMI/SCADA
Yukon™ Visual T&D™ from Eaton’s Cooper Power Systems is a smart monitoring and control alternative to traditional SCADA. Many utility customers want the benefits of a SCADA system, but do not have the resources to implement a complicated project or to staff a 24/7 control room. Visual T&D provides a scalable, pre-configured, easy-to-use alternative.
Visual T&D is an application that continuously monitors substation and distribution equipment operation and performance. It provides all of the information regularly provided by traditional SCADA systems in a way that is less complex and simpler to implement and use. The system collects a long-term, detailed operational history that allows utilities to understand their system operation and to plan maintenance and capital expenditure programs more efficiently.
Modernizing your substation? Put your data to work!
As a standalone HMI, or as a companion product to the SMP Gateway, Yukon Visual T&D integrates seamlessly in your substation environment to provide immediate access to your data, with the following advanced features:
• Supports a large variety of devices and data sources.
• Licensing model adapts to the large number of data points in modern IED’s.
• Reliably and cost-effectively logs all events, alarms, operator actions, and all transitions on all data point in a high-performance historian based on industry-proven PostgreSQL and Microsoft SQL Server databases.
• Automatically retrieve event files.
• Millisecond time tagging
• Data point tagging for information and control inhibition
• Power industry shape libraries to simplify diagram creation
Connect to all your devices – easily
• Connect to industry-standard OPC servers, including DNP3 and IEC 60870-5-101/104 OPC servers
Automatically retrieve event files
When used with SMP Gateway, Visual T&D can automatically retrieve and process event files from digital fault recorders and relays.
• Automatically retrieve events from a growing number of devices, including DFRs and relays
• Convert event files to industry-standard COMTRADE format
•Display multiple channels simultaneously
• Extract channel data for processing and analysis
The Visual T&D data log is a true historian and is designed to provide you with a complete record of all substation data, alarms and events. Using professional third-party professional database engines PostgreSQL or Microsoft SQL Server, Visual T&D allows:
• Safe backup of all logged data at all times, following your corporate IT guidelines.
• Datalog size is only limited by your hardware infrastructure.
• Reports can be done with Visual T&D native tools, as well as any third-party reporting tools.
• Datalog can be deployed on a dedicated database (PostgreSQL database engine provided at installation time) or on a corporate database already in place.
Want to inquire?
The SMP I/O replaces traditional centralized RTU installations. It is a scalable, distributed monitoring and control device perfectly adapted to today’s substation automation requirements.
• The SMP I/O meets industrial and utility standards for vibration, electrical surges, fast transients, and extreme temperature ranges
Designed for growth.
• The SMP I/O input and output cards can be added in minutes, without removing the unit from the rack.
• The SMP I/O includes 1 Ethernet and 1 RS-485 port. It uses the industry-standard DNP3 protocol.
Reduced engineering effort.
• The SMP I/O saves on cabling, commissioning and configuration time, especially when it is used with the Cybectec SMP Gateway. Its removable connectors speed up hardware changes.
• The SMP I/O’s error detection features ensure data integrity between the data point and the control center. It supports IRIG-B synchronization for precise timestamping.
• The SMP I/O is accessible via the DNP3 protocol over RS-485 or TCP/IP. It has one RS-485 serial port and one Ethernet connector (copper or fiber). • The SMP I/O is compatible with any DNP3 master station. It is a level 2 DNP3 device and thus supports report-by-exception for reduced bandwidth usage. • The SMP I/O’s clock can be synchronized by the DNP3 protocol, or by an external IRIG-B time source for greater accuracy.
Want to inquire?
The Cooper Power™ series SMP 4/DP is robust, but extremely flexible—providing utilities with the advanced features required to build intelligent solutions that meet NIST Smart Grid road map and security guidelines.
• Extracts and concentrates data from any device, regardless of protocol.
• Sends data to SCADA, control centers, and any other centralized management applications.
• Automates data processing and device control.
• Provides secure remote access to any device.
• Manage alarms and visualize substation single-line diagrams from a web interface.
• Future-proof your Smart Grid — facilitates upgrades for security, protocol, or other improvements.
• Ideal for retrofit and upgrade projects. The SMP 4/DP is designed for Greenfield or Brownfield. It integrates existing / legacy RTUs, IEDs, PLCs, and multiple control centers.
• Suitable for both pole-top or pad-mounted distribution automation applications.
• Universal port (RS-232/485) enables connection to any serial device.
• Data filtering allows for efficient bandwidth management over legacy low speed networks.
• Two Ethernet ports support flexible network architectures for security and IEC 61850.
• Fully compatible with Yukon™ IED Manager Suite for secure remote event, passthrough, and configuration management.
• Use with SMP I/O to achieve comprehensive real-time. control solutions
Want to inquire?
As the fourth generation of SMP™ gateway, Eaton’s Cooper Power™ series SG-4260 leverages more than 20 years of hardware and software development, and delivers one of the most advanced substation automation solutions on the market. Flexible, scalable, evolutive, the SMP SG-4260 is a Smart Grid enabler.
Simplify SCADA operational activities
• Create a homogenous system with a single entry point for each substation.
• Access IED data with more than 80 protocols supported.
• Integrate the latest IEC 61850 IEDs with legacy RTUs, IEDs and PLC’s.
• Manage alarms, visualize data and control substation devices directly from the new SMP Gateway local or remote interface.
• Access substation single-line diagrams directly from a touch screen monitor or remotely using a web browser
• Manage network segments— up to ten Ethernet ports with multi-homing and VLAN tag support.
• Synchronize IEDs using IRIG-B and PTP—IEEE Std 1588™- 2008 standard.
• Create a NERC CIP-compliant electronic perimeter to protect substation devices.
• Secure SCADA protocols using TLS and X.509 certificates as per IEC 62351-3.
• Implement DNP3 Secure Authentication V5 as per IEC 62351-5.
• Protect your system with a built-in firewall and integrity check.
The SMP SG-4260 is the most robust SMP Gateway platform available
• Meet all IEEE® and IEC requirements for substation grade equipment.
• Provide high data availability with built-in redundancy schemes.
• Wurldtech’s Achilles® Communications Level 1 certified.
• NESSUS tested.
Want to inquire?